Security and monitoring

Switching alarm companies without a gap in protection

Most of what is already on your walls can often stay. The paperwork is the part that catches people, so start there.

Topic
Security
Reading time
About 5 minutes
Updated
Related service
Security & Monitoring

The short version

  • Read your current agreement before you do anything else: the end date, the renewal clause and how to cancel.
  • Wired door and window sensors can usually be reused. Wireless ones depend on the brand.
  • Have the new service working before you cancel the old one.
  • Test every sensor after the change, and update your alarm registration if your town requires one.

First, read the agreement you signed

Alarm monitoring is normally sold on a written agreement, and the terms differ a great deal from one company to the next. Before you call anyone, find yours and look for four things.

  • The end date. When does the initial term finish? If you are still inside it, there may be a charge for leaving early.
  • The renewal clause. Many agreements renew themselves for a further period unless you give notice. Find out how long the renewal is and how far ahead the notice has to be given.
  • How to cancel. Often it has to be in writing, sent to a particular address, a set number of days before the date. A phone call may not count. Keep a copy and proof of when you sent it.
  • Who owns the equipment. Some companies sell you the equipment; some lease it and want it back.

If you cannot find the agreement, ask your current company for a copy and for your contract end date in writing. Ask every company you are considering the same four questions about their own agreement, us included, and read it before you sign.

What can usually be reused

An alarm system is three layers: the sensors around the house, the panel that listens to them, and the monitoring service the panel reports to. Changing companies always changes the third. Whether it changes the first two depends on what you have.

What you haveCan it stay?
Wired door and window contactsUsually. A wired contact is a simple switch, and almost any modern panel can read it
Wired motion and glass-break detectorsUsually, if they still work
Wireless sensorsIt depends. Each maker uses its own radio signal, so they work only with a panel that speaks the same one, or through an adapter
The panel and keypadSometimes. Some panels can be moved to a new provider; others are locked to the old one, or are simply too old
The cellular radioOften replaced, because it is tied to the old provider's service
Smoke and carbon monoxide detectorsDetectors wear out with age. Check the date on the back of each one
Cameras and video doorbellsDepends entirely on the make and whose service they record to

The practical way to find out is to show someone. A photograph of the panel, the inside of the metal cabinet if there is one, and one or two sensors is normally enough to tell what is possible. Tell us what you have and we will tell you what is practical for your house; see Security & Monitoring.

A word about older wired houses

Houses built with a wired alarm have something valuable in the walls: cable to every door and often every window, put in when it was easy. Even when the old panel is long past use, that wiring is usually sound. A new panel can take over the existing wired sensors, add a current cellular radio and an app, and leave the house looking the same as it did.

That is very often the best-value way to bring an old system up to date.

Changing over without a night unmonitored

  1. Check your dates. Work out when you are free to leave and when notice has to be given.
  2. Have the new company look at the house. Agree what stays, what is replaced and what is added, and get it in writing.
  3. Book the installation first. Set the date for the new system before you cancel the old service.
  4. Change over. On the day, you call your old monitoring center and ask for the account to be put on test. The installer then installs and programs the new equipment and tests it with the new center.
  5. Then cancel. Once the new system is reporting, send the cancellation to the old company in the way your agreement requires.
  6. Clean up the paperwork. Update your alarm registration if your city or county requires one. If your insurer has a monitoring certificate on file, ask the new company for a current one.

Done in that order, the house is never without monitoring.

What to test afterward

Do not take anybody's word for it, including ours. With the system on test at the monitoring center:

  • Open every protected door and window and check each one shows up by name.
  • Walk past each motion detector.
  • Arm the system from the panel and from the app, and disarm it both ways.
  • Let the entry delay run out once, so you hear the siren and know what it sounds like.
  • Ask the monitoring center to confirm which signals they received.
  • Check your contact list and verbal passcode are on the new account. They do not transfer with you.

Our guide to what happens when an alarm goes off explains what the contact list and passcode are for.

Be careful with offers at the front door

A long-running sales trick in the alarm trade goes like this. Someone knocks, points at the sign in your yard and says they are there to "upgrade" your system, or that your alarm company has been bought out or gone out of business. What you sign is a new agreement with a different company, and you may still owe the first one.

A reputable alarm company does not send someone unannounced to replace your equipment. If anyone at the door says they are from your provider, close the door and call the number on your bill to check. Do not let them in to "look at the panel", and do not sign anything on the doorstep.

Questions worth asking a new company

  1. How long is the agreement, does it renew by itself, and how do I cancel?
  2. Who owns the equipment when the agreement ends?
  3. How does the panel communicate with the monitoring center? See cellular or Wi-Fi.
  4. Which of my existing sensors will you reuse?
  5. Who installs it, and who do I call when something needs attention?
  6. Where is your office, and what is your state alarm license number?

The last one is easy to check. In Tennessee, Mississippi and Arkansas an alarm company has to be licensed by the state. Ours are printed at the foot of every page and on the licenses page.

Written by the team at Security Solutions, Inc. in Brighton, Tennessee. General guidance, not a quote for your house: every home is different, and we would rather look at yours than guess.

What we install

The services behind this guide.

Where we work

We install from our office at 139 N Main St in Brighton, within about 100 miles. The service areas page lists every town and about how long the drive is.

I have had the absolute best security service I’ve ever had. I’ve used ADT and Vivint, and without questions these guys are the best and the most affordable!

Bob Frank, Google review 5 years ago

Free quote

Rather talk it through?

Tell us about the house and we will call you back to set up a free visit. Or skip the form and call the office.

901-476-6918

Security Solutions, Inc.
139 N Main St, Brighton, TN 38011
Toll-free 1-888-280-8775

Request a free quote About a minute

We use these details to reply to your request and for nothing else. Privacy