New Construction & Builders
Low-voltage for new homes, on the builder’s schedule.
Plan review, pre-wire and trim-out for builders and for people building their own home. One company for the alarm, the cameras, the network and the sound, from the drawings to the day the buyer moves in.
- For
- Builders and owner-builders
- We do
- Plan review, pre-wire, trim-out
- Licensed in
- TN, MS and AR
- In business since
- 2001
Google reviews
What builders say.
S.S.I. installs the security systems in all of our new home construction jobs. We are thoroughly impressed with their work and can’t imagine depending on any other company. They’ll always be there for you.
Security Solutions is easily the best low-voltage company in the Memphis area for Audio/Visual, Alarm system, and smart home equipment. We are a large residential contractor and S.S.I. contiaully goes above and beyond for our customer base. S.S.I. has very fair prices for their equipment and go the extra mile to assure it is setup to your liking. Oftentimes smart home equipment can be frustrating, and S.S.I. has always worked through any user problems a customer may have. We use S.S.I. for all of our Low-voltage needs.
For builders
A trade that shows up when the frame is ready, not when the painters are.
Low-voltage is a small line on the budget and an easy one to get wrong. Miss the gap between rough-in and insulation and every cable after that is a patch in a finished wall.
We have been in business since 2001, and our office is in Brighton. For a builder the work comes down to three things: a plan agreed before framing, a pre-wire that happens in its slot, and a trim-out that leaves the systems working for the final walk-through.
You deal with one company for the security pre-wire, the data and television outlets, the speaker wire, the cameras and the Wi-Fi. Your buyer deals with the same company after closing.
- Plan review
- Low-voltage marked up on your drawings before framing
- Pre-wire
- After rough-in, before insulation
- Trim-out
- After paint, before closing
- Handoff
- We show the buyer the panel and the app
- Licensed
- TN Alarm Cert. #1140
MS Lic. #15006256
AR Lic. #CMPY0001804 - Better Business Bureau
- Accredited since 2001, A+ rating
We are not the electrician. Our work is the signal side of the house: security, network, sound and picture. Client to confirm: who handles power at television and equipment locations
What a builder gets
Fewer trades to chase, and a buyer who is taken care of.
Six things you can check for yourself, before the first house and after the last one.
One low-voltage trade
Alarm, cameras, network, audio and television pre-wire from one company, planned together.
A plan before framing
Your drawings marked up with every location, so the superintendent and the buyer agree before a cable is pulled.
Two visits, in their slots
Pre-wire after rough-in. Trim-out after paint. Give us the dates and we plan around them.
Licensed in three states
TN Alarm Cert. #1140. MS Lic. #15006256. AR Lic. #CMPY0001804. Ask us for license copies for your subcontractor file.
A company with a history
In business since 2001. BBB Accredited since 2001, A+ rating.
One number after closing
We show the buyer the alarm panel and the Alarm.com app in their own house. After that, the homeowner calls the office that did the work: 901-476-6918.
For your file: Client to confirm: insurance certificate for builders, and what the buyer receives at closing
The schedule
Six stages of a build, and where we fit in each.
Step through the build. The drawing shows the house at that stage, and the list says what we do, what we need from you, and what you get.
An illustration, not a customer’s home.
1. PlansBefore the slab is poured
- You send the floor plans and whatever the buyer has chosen so far
- We mark up every outlet, speaker, camera, keypad and access point on the drawings
- We send back the marked-up plan and a written proposal for the low-voltage work
2. FramingRoof on, windows in
- You tell us when the frame will be up
- We walk the frame with your superintendent, or the buyer, and check each location against the plan
- Changes are easy at this point. That is why we come
3. Pre-wireAfter the other trades rough in, before insulation
- We pull the data, coax, speaker, camera, access-point and security cable
- We set the media panel and bring every run back to it
- We need a clear day in the house once the electrician has roughed in
4. Insulation and drywallWe stay out of the way
- Cable ends are left coiled at each opening where the drywall crew can see them
- You tell us when the paint is finished
- Nothing for you to manage in between
5. Trim-outAfter paint, before closing
- We install the alarm panel, keypads, cameras, doorbell, speakers and access points
- We test what we installed before we call it done
- The house is ready to show with the systems working
6. Move-inThe buyer takes the keys
- We show the buyer the panel and the Alarm.com app, in their own house
- They call our office afterward about anything we installed
- You hand over a house that already knows how to lock up
The usual order. Every builder runs a schedule a little differently, and we fit ours to yours.
A list to start from
What the low-voltage list for a new home can cover.
An example to mark up. It is not a package and it is not a price. Cross out what your homes do not need, add what is missing, and we will work from your version.
ExampleIn the walls of every house
- Alarm pre-wire. A keypad location, the door contacts and a motion detector.
- A media panel. Inside the house, where every cable comes home.
- Television locations. Data and coax to the walls where a television will hang.
- An access-point drop. One cable in the ceiling, so the Wi-Fi is fed by wire.
- The front door. A cable for a video doorbell.
ExampleFor the buyer who wants more
- Camera drops. Under the eaves and at the garage.
- Speaker wire. To the living room ceiling, the patio or a media room.
- More data outlets. The office desk, the bedrooms, the bonus room.
- Conduit. An empty path to the attic and the television wall, for later.
- Smart home devices. Locks, garage door control and a thermostat on Alarm.com at trim-out.
Have a plan set ready? Call and we will tell you where to send the drawings. What each kind of cable is for is on the structured wiring page.
Building your own home
No builder between us? The same steps, with you in the middle.
If you are acting as your own contractor, or your builder has left low-voltage to you, call us once you have floor plans. We will go through them with you room by room, the same way we would with a builder, and tell you when we need to be on site.
- Buying in a new neighborhood? Ask your builder who does their low-voltage, and ask early. Additions are easiest before the frame goes up.
- Not sure what to wire for? Start with our guide, what to pre-wire in a new home.
- Want the whole plan drawn? That is system design, and the first visit is free.
Can you pre-wire after the insulation is in?
No, not well. Once the walls are filled and covered, a pre-wire turns into a retrofit: fewer places can be reached, it takes longer, and somebody has to patch. Tell us the framing date as soon as you have one and the question never comes up.
How much notice do you need?
As much as you can give. The ideal is a call when framing starts, so the pre-wire is on the calendar before the electrician has finished. Client to confirm: scheduling lead time for pre-wire and trim-out
Can I upload a plan set on this site?
Not yet. Use the form on this page or call 901-476-6918, and we will tell you where to send the drawings. Client to confirm: where builders should send plan sets
Do you work to a builder’s standard package?
Tell us what your standard home includes and we will tell you how we would work to it, and how a buyer’s extras could be handled. If there is no list yet, the example on this page is a place to start. Client to confirm: whether you work to builder standard packages, and how buyer upgrades are priced
Who does the buyer call after closing?
Us. The office that wired the house is the office that supports it, at 901-476-6918. Your superintendent does not have to learn how to reset a keypad.
Where do you work on new construction?
Within about 100 miles of Brighton, Tennessee. We are licensed in Tennessee, Mississippi and Arkansas. See the towns we serve, with the drive time to each.
Goes well with
What goes in while the walls are open.
Structured Wiring
Every kind of cable we pull, and where each one ends.
Structured WiringSystem Design
The room-by-room plan, for a buyer who wants more than the standard.
System DesignSecurity & Monitoring
The alarm, pre-wired while the walls are still open.
Security & MonitoringNetworking & Wi-Fi
Access points on the ceiling drops, ready for move-in.
Networking & Wi-FiWe work across West Tennessee, North Mississippi and East Arkansas, including Atoka, Covington, Munford, Millington, Bartlett, Memphis, Southaven and West Memphis. Browse by state: Tennessee, Mississippi, Arkansas. See every town we serve
Worth reading first: What to pre-wire in a new home, Home theater or media room. All guides
Free quote
Builders: tell us about the next house.
Leave the town and a number and we will call to talk through the plans and your schedule. Or call the office.
901-476-6918Security Solutions, Inc.
139 N Main St, Brighton, TN 38011
Toll-free 1-888-280-8775