Security and monitoring

Alarm monitoring explained: what happens when it goes off

The siren is the part everybody knows. This is the rest of it: where the signal goes, who picks up the phone, and what you should have ready before it ever happens.

Topic
Security
Reading time
About 5 minutes
Updated
Related service
Security & Monitoring

The short version

  • A monitored alarm sends its signal to people whose job is to act on it, day or night.
  • The monitoring center calls you first. Answer, and know your passcode.
  • The center asks for a dispatch. Your local police, fire or ambulance service decides how to respond.
  • Keep the contact list current. It is the part of the system that goes stale.

Monitored and unmonitored are different things

An alarm that only makes noise relies on a neighbor hearing it and doing something. An alarm that only sends an alert to your phone relies on you seeing it, which is not much help when you are asleep, in a meeting, in the air or out of signal.

A professionally monitored alarm sends its signal to a monitoring center: a staffed room that receives alarm signals around the clock and follows a written procedure for each one. That is the service you pay a monthly fee for. The equipment on the wall is the same either way. What changes is whether anyone is on the other end.

The sequence, step by step

Here is what happens with a typical burglary signal on a professionally monitored system. The exact timings are set up with your installer, and procedures vary a little from one monitoring center to another.

  1. A sensor trips. A door contact opens, a motion detector sees movement or a glass-break detector hears a window go. The panel knows which sensor it was.
  2. The entry delay runs, if it is an entry door. Doors you normally come in by give you a short countdown to disarm. Windows, motion detectors and other doors usually do not.
  3. The siren sounds and the signal goes out. The panel sends the alarm, with the zone that caused it, to the monitoring center. On the systems we install, that signal travels over a cellular connection, which we explain in cellular or Wi-Fi: how your alarm calls for help.
  4. You get an alert. The app tells you what tripped. If you have cameras, this is the moment to look.
  5. The monitoring center tries to reach you. An operator calls the numbers on your account, in the order you gave them. If you answer, they ask for your verbal passcode.
  6. You cancel, or they ask for help. If you give the right passcode and say it was a mistake, the alarm is canceled. If nobody answers, if the passcode is wrong, or if you say there is a real emergency, the operator contacts the emergency service for your address and requests a dispatch.
  7. The local agency responds. Police, fire or ambulance crews are sent by your city or county, under their own priorities and rules. The monitoring center passes on what it knows, such as which sensor tripped.
  8. Afterward. You disarm and reset the system, check what set it off and, if it was a false alarm, work out why so it does not happen again.

Not every signal is handled the same way

The panel sends more than one kind of message, and the procedure depends on which it is.

SignalWhat usually sets it offHow it is generally handled
BurglaryA door, window, motion or glass-break sensor while the system is armedThe center tries to verify with you before asking for police
Fire or carbon monoxideA monitored smoke, heat or carbon monoxide detector, armed or notTreated as more urgent than a single door sensor. Get everyone out first and talk to the operator from outside
Panic or medicalA panic button on the panel or a pendantSomebody pressed it on purpose, so it is treated as a request for help
DuressA special code that disarms the system and quietly signals for helpHandled as an emergency without a siren
TroubleLow battery, lost power, a sensor not reporting, lost communicationA notice to you, and often to your installer. Nobody is dispatched

Smoke and carbon monoxide detection that reports to the monitoring center, and panic or medical pendants, are things to ask about when a system is designed. They are not on every system. Our security page lists what we can add.

The passcode, and why it is not your keypad code

You will have two secrets. The first is the code you type to arm and disarm. The second is a spoken word or phrase the operator asks for on the phone. It proves that the person saying "it is fine, cancel it" is really you.

Pick a word the whole household can remember under stress, and make sure everyone on the contact list knows it, including the grandparent or neighbor you listed as a backup. An operator who hears the wrong word has to treat the call as unverified.

Save the number.

Ask your alarm company which number the monitoring center calls from and save it in your phone under a name you will recognize. Many people now ignore calls from unknown numbers, and that is the one call you do not want to ignore.

What monitoring cannot do

It is worth being plain about the limits.

  • It does not decide how fast help arrives. The monitoring center requests a dispatch. How quickly a car or a truck gets to you depends on your local agency, how busy it is and how far away you live. Anyone who promises you a response time is promising something they do not control.
  • It does not stop a break-in. An alarm makes noise, calls for help and makes a house a less comfortable place to stay. That is a great deal, but it is not a wall.
  • It does not see. A door sensor knows the door opened. It does not know who opened it. That is what cameras are for.
  • It is only as good as your contact list. A phone number you gave up three years ago is the most common weak point in any monitored system.

Some cities and counties also require alarm owners to register their system, and some charge for repeated false alarms. Memphis, for example, registers alarms through its Metro Alarm Office. The rules differ from town to town, so check with your own city or county. We cover the prevention side in false alarms and how to avoid them.

Five things to have ready before it ever goes off

  1. A current contact list. At least two people who answer their phones, in the order you want them called.
  2. A passcode everyone knows. Including the people on that list.
  3. The monitoring center's number saved in your phone.
  4. A code for each person. Family, the cleaner, the dog sitter. Separate codes show who came and went, and one can be removed without changing the rest.
  5. A test now and then. Ask your alarm company how to put the system in test mode, then open each door and walk past each motion detector. If we installed your system, call 901-476-6918 and we will walk you through it.

Written by the team at Security Solutions, Inc. in Brighton, Tennessee. General guidance, not a quote for your house: every home is different, and we would rather look at yours than guess.

What we install

The services behind this guide.

Where we work

We install from our office at 139 N Main St in Brighton, within about 100 miles. The service areas page lists every town and about how long the drive is.

Mike and his team at SSI have taken awesome care of us for the last few years. Any time I’ve ever needed to add to my alarm or surround sound or had a question or concern, they’ve taken care of it quick, fast and in a hurry with 0 issues. Won’t be using anyone else.

Chris Schaeffer, Google review 5 years ago

Free quote

Rather talk it through?

Tell us about the house and we will call you back to set up a free visit. Or skip the form and call the office.

901-476-6918

Security Solutions, Inc.
139 N Main St, Brighton, TN 38011
Toll-free 1-888-280-8775

Request a free quote About a minute

We use these details to reply to your request and for nothing else. Privacy